Solid control series
Solid control series
The Mortec 3-10 sand remover can remove approximately 95% of rock debris larger than 74m and approximately 50% of rock debris larger than 40m under normal operation. CS2-10, The vertical installation type sand remover consists of three 10 inch cyclones installed vertically on the bottom pry. Each cyclone is connected by four replaceable wear-resistant polyurethane components through stainless steel clamps.
- Email:Sales@machtec.cn
- Telephone:+86 22 60978800
The MTK-CS series desander can remove approximately 95% of rock debris larger than 74 μ m and approximately 50% of rock debris larger than 40 μ m under normal operation.
Features and advantages:
The sand removal cyclone is made of polyurethane or high chromium cast iron, with a long service life.
Clamp type, easy to maintain
Compact design with small footprint
According to different processing capacities, 1, 2, or 3 10 "or 12" sand removal cyclones can be flexibly selected
Users can connect quickly and flexibly during assembly
Technical parameters:
model | MTK-CS300×2/1 | MTK-CS 250×2/1 | MTK-CS 200×2/1 |
Cyclone diametermm | 300 | 250 | 200 |
Working pressureMPa | 0.25～0.4 | 0.25～0.4 | 0.25～0.4 |
Processing capacitym3/h | 240 / 120 | 220 / 110 | 160 / 80 |
Screen sizemm | 1240*585 | 1240*585 | 1240*585 |
Screen specifications | 120-200 eye | 120-200 eye | 120-200 eye |
Inlet sizemm | DN150 | DN150 | DN125 |
Size of slurry outletmm | DN200 | DN200 | DN150 |
Motor PowerkW | 0.5 | 0.5 | 0.5 |
qualitykg | 788 / 689 | 750 / 660 | 720 / 640 |
External dimensionsmm | 1630*1420*2320 | 1630*1420*2320 | 1630*1420*2320 |
?
If you have any questions or support, please fill in the following information and we will reply to you as soon as possible!!